FLASHING TAPE FOR DECK JOISTS is a common solution for the protection of the substructure of decks from moisture. Being an organic substance, conventional wood is extremely susceptible to mold, rot, and weathering. And one of the best ways of protecting this substructure is opting for flashing tapes. After all, your deck frame can suffer considerable damage from the outdoor elements, and the most common area that receives maximum disintegration is the zone where the deck boards come in touch with the substructure of the deck. And you can shield the deck substructure with strong flashing tapes.
WHAT EXACTLY IS FLASHING TAPE FOR DECK JOISTS?
Flashing tapes are non-butyl tapes with self-sealing made from extremely strong polymer acrylic adhesive that equips them with an entirely waterproof seal. The permanent adhesive bond can last up to 5 decades and it comes with a 25 years adhesive guarantee, implying the durability of the deck frame. These tapes are tested with all forms of timber treatments.
The FLASHING TAPE FOR DECK JOISTS can be used for both conventional timber decking as well as advanced composite decks. When employing a composite deck board, a good amount of moisture gets absorbed in the substructure draining off the boarding. And as the number of moisture increases, the frame will become more vulnerable to rotting when left unprotected.
WHY’S IT NECESSARY TO APPLY FLASHING TAPES?
As is already mentioned, any construction from wood, particularly outdoors exposes it to significant weathering. Even though your deck is constructed from treated or composite wood or constructed with dense timber like ipe, a wooden deck will definitely suffer from wear and tear.
As per the statistics presented by Decks.com, the major share of the substructure of the deck will start splitting and rotting within 8 to 10 years. And you can ensure that the deck is safely supported by the substructure all through the life of the deck with very little cost by investing in the FLASHING TAPE FOR DECK JOISTS.
These tapes will not only protect your deck joists but also rim joists and double joists along with ledger boards, stringers, and beams. Moreover, these tapes will also help in saving on future maintenance as well as replacement costs and enhance the anticipated life of the deck. Above everything, these tapes help in improving the structural integrity of the deck. Also, using flashing tapes is much easy and you can add this superb protection without any added effort.
WHAT ARE THE BENEFITS OF USING FLASHING TAPE FOR DECK JOISTS?
More than 90 percent of residential decks across the globe are constructed from pressure-treated composite lumber through the process of deck framing. This is owing to its easy availability and comparatively reduced costs. Even though pressure-treated lumber is quite durable and more resistant to various weather elements like termites. And over time, you can expect the wooden deck frame as well as the substructure to become afflicted by rot. This is where the role of FLASHING TAPE FOR DECK JOISTS comes in.
- These tapes are waterproof, airproof, and smoke-tight and are endowed with an effortless release.
- The non-butyl self-adhesive version of flashing tapes made from durable polymer acrylic adhesive offers completely waterproof sealing.
- Though the durability of these tapes depends from company to company, you can expect them to come with a guarantee of 25 years.
- Non-butyl flashing tapes are UV stable and are able to maintain their integrity for a longer time. They are also stable across a varied temperature ranging from 93 and -40 without any peeling, cracking, or loss of strength.
WHERE SHOULD YOU APPLY FLASHING TAPE FOR DECK JOISTS?
FLASHING TAPE FOR DECK JOISTS must be applied over the top of the joists as a capping. You should never wrap the entire timber with tape as it will prevent the timber from breathing. It shields the timber by creating a strong seal, protecting against moisture in places of overlapping.
As a result, water is stopped from sitting over the flat surfaces and damaging the timber in the long run. It’s imperative that you use these tapes on the area that’s likely to come in contact with the ground. You can also use flashing tapes on fence posts for creating a watertight sealing.
Cut ends of lumber are also weaker spots through which moisture can enter easily as there is no treatment. But you can easily do away with this issue with a single layer of flashing tape.
Another key area of applying deck tape is the fastener. You can shield fasteners from corrosion along the stainless steel fittings and timber. The best aspect of deck flashing tape is that you can get it in varying widths for covering a wide range of breadth like double timbers that may be required for the framing boards.
Many people have a common query why they should install composite decking over a wooden structure that may not last very long. And the solution here is FLASHING TAPE FOR DECK JOISTS. No matter whether you have employed a contemporary composite deck or conventional hardwood decking area, deck tapes can ensure boosting the durability of the timber substructure. It’s a simple yet highly efficient addition to extending the durability of the new decking zone so that you can enjoy it in the long run.
THE BOTTOM LINE
Whether you are going for a home or a commercial improvement project, there are several details to consider and the list can get really long in no time. So, it’s natural that you will wonder whether FLASHING TAPE FOR DECK JOISTS is necessary or not when it comes to building a new deck.
It is also because you won’t be able to see it after the construction is over or boast about it in front of your friends and family when they come to hang out on the deck. But just as you would never leave out insulation from the walls on the roof, the same way you cannot leave off joists in decks and you must ensure its protection with flashing tapes.